Posts

I’ve been slowly working on piecing together the insulation to make the car more enjoyable to drive. This should reduce external sound and losses of internal heating/cooling quite a bit.

Edit: Most of this info is wrong now. You can find the latest source repository at https://github.com/joshellissh/PiDGC Edit: Updated 12/9/21 to reflect large changes I have made to the system.

After much searching and consternation I decided to go with old Miata seats on my build. They are comfortable, easy to get new skins for, and (I think) look good.

I’ve made progress on a lot of things over the last few weeks. I’ve started the wiring that’s on the outside of the car (main battery cables, etc.), finished some

As you guys all know, ground clearance on these cars is hard to come by. It’s made worse in my case by the downpipe from the turbo exiting after the

The Ecotec LNF I have is from a 2008 Pontiac Solstice GXP, and came with about 57k miles. It needed some routine maintenance and a little modification ahead of the

As you’ve hopefully seen in the previous posts, the engine did not fit with the stock firewall. That would have been ideal, but it just wasn’t in the cards. It

Taking a little detour from the more major work I’m doing, I decided to rebuild the old master cylinder. It was in pretty terrible shape: rusted and crusty all over,

It took a while to get all the necessary parts in, but I finally have the fuel tank buttoned up and pressure tested and all the parts needed to finish