It took a while to get all the necessary parts in, but I finally have the fuel tank buttoned up and pressure tested and all the parts needed to finish the fuel system.
This is the setup I used, from tank to engine:
In-tank 100 micron steel mesh filter
-8 AN hard tube on bottom of tank to AEM 385 LPH external fuel pump
Fuel pump to Corvette 58 PSI regulator and filter with return line
-6 AN return line to tank
-6 AN hard tube to about half way up the chassis
-6 AN hose to stock quick disconnect on engine
You can see how I positioned and routed everything in the pictures below!
